Using the Microfilm Reader Machines

Step 1: Turn the Machine On Step 2: Put the roll on the left post Step 3: Push the green button to open the latch
Step 1 Step 2: Step 3
Step 4: Feed the film into the green guide until the film is on the other side of the glass. Step 5: Close the latch. Step 6: Push the Load/Rewind Buton
Step 4 Step 5 Step 6
Step 7: You can use the rotate knob to orient the picture if needed. Step 8: Depending upon how the film is printed, the bottom guide can move the contents left to right or up to down. Step 9: To move forward and backward use the control knob.
Step 7 Step 8 Step 9
Step 10: Use lower and upper lens controls to focus or enlarge the screen. Step 11: Position the contents so that the page you want to print is in the vertical box lines. Step 12: Put money in the vending slot on the side of the machine. Machines will only take dimes.
Step 10 Step 11 Step 12
Step 13: Push the print button. Step 14: The printed image will come out at the bottom of the machine. Step 15: Push the load/rewind button.
Step 13 Step 14 Step 15
Step 16: Put the film back in the box. Put the box on the table in the middle of the microfilm area. Turn off the machine.